Extreme Flight 50cc Extra 300 ARF, Инструкция по эксплуатации

Страница: 37 / 39

37
54. Now let’s install the stab/elevators. Open the holes in the rear side
of the fuselage to expose the pre-mounted 3mm blind nuts. You
will also need to open a hole for the servo leads to pass through.
Slide the stab halves onto the carbon fiber stab tube and secure
with a 3mm bolt and washer inserted through each mounting tab
and into the pre-mounted blind nuts. Make sure to use a drop of
blue Loctite on these bolts.
55. Your Extra includes one of our PILOT X helmet head figures
and detailed instrument panel, as well as a Depron canopy floor.
These components are light weight and add a nice finishing touch
to the Extra. Assemble the instrument panel and screw the face
shield onto the pilot figure. Glue the Depron insert into place with
white glue or foam safe CA and use the same glue to attach the
instrument panel. Either glue the pilot in position or mount with
blind nuts.
55. The canopy is retained by 2 3mm bolts and bonded sealing
washers. The wings are retained by inserting the 1/4x20 nylon
bolts through the holes in the fuselage just behind the wing tube
and into the pre-installed blind nuts in the root rib of the wing. Be
careful not to cross thread the bolts and inspect them periodically
to insure thread integrity.