Extreme Flight 50cc Extra 300 ARF, Инструкция по эксплуатации

Страница: 18 / 39

18
27. Position the tailwheel assembly on the rear bottom of the fuselage
and be sure the tailwheel wire is aligned with the rudder hinge line.
Secure the tailwheel with a couple of pieces of masking tape while
you drill 2 holes with a 1/16” drill bit. Apply a few drops of thin
CA to the holes and allow to dry then secure the assembly to the
bottom of the fuselage as shown with the 2 provided coarse thread
wood screws and 2 washers.