28
38.
Next let’s install the engine. We have made this process very
easy. The center and offset marks have been scribed into the front
of the firewall with a laser. Most manufacturers will provide a
mounting template for their engines. Templates for the DA-50 and
Brillelli 60 are available for download from our website. Simply
tape the template to the firewall making sure the horizontal and
vertical lines on the template are aligned with the lines on the
firewall. Be sure to align the vertical line on the template with the
thrust offset line (the line to the
RIGHT
of the center line). Drill
the mounting holes at the designated location.
39.
Use the recommended mounting bolts and large washers to mount
the engine to the firewall. You will need to use standoffs to get the
motor to 6.25” inches from the firewall to the engine thrust washer.
For the DA-50 this requires the use of the standard 2.5” standoffs
normally supplied with the engine. Remove the engine and brush a
coat of alcohol thinned epoxy onto the exterior and interior of the
motor box. Once dry permanently mount the motor. Be sure to
use some large washers behind the firewall to better distribute the
load. Again, use blue Loctite on all bolts. On the following page
is a photo of the engine mounted and ignition unit installed.
Содержание 50cc Extra 300 ARF
