Exerpeutic Workfit 1030, Руководство пользователя

Страница: 26 / 33

24
OPERATIONS & ADJUSTMENTS
SETTING DOWN THE TREADMILL
Remove the Knob (74) from the back of the Table (64) . Lift both Table (64) and Table Angle
Adjustment Tube (68) up. Then slot the Table Angle Adjustment Tube (68) into the Table Angle
Adjuster (70) which is under the Table (64) . Screw the removed Knob (74) into the holes on the
Table Angle Adjustment Tube (68) and Table (64) to lock the Table (64) in place.
To set down the treadmill, place one hand on the back end of the treadmill and the other hand to
pull the
Spring Knob (23) , then carefully lower the deck to the ground until the Spring Knob (23)
"pops" down into the locked position.
See diagrams A, B, and C.
Note: Do not stand under the deck when setting down the treadmill. TO PREVENT INJURY
PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN LIFTING UP OR SETTING DOWN THE
DECK.
C B
Spring Knob
A
Transport Wheel