Exerpeutic Workfit 1030, Руководство пользователя

Страница: 27 / 33

25
STORAGE
FOLDING UP THE TREADMILL
Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill up into the upright
position until the
Spring Knob (23) "pops" into the locked position. Remove the Knob (74) from the
Table Angle Adjustment Tube (68) . Hold the Table Angle Adjustment Tube (68) with one hand
and the other hand to lift the Table (64) up until the T able Angle Adjustment Tube (68) can be
lowered down. Then lower both the Table (64) and Table Angle Adjustment Tube (68) down.
Screw the removed Knob (74) into the knob hole on the back of the Table (64) . Make sure the deck
is securely locked before moving the treadmill. See diagrams E, F, and G.
The unit can be carefully tilted onto its transport wheels for easy moving and storage. Ensure the
Power Switch (39) is tuned to the OFF position and the Power Cord (91) is un-plugged from the
electrical wall outlet. Store the treadmill in a clean and dry environment away from children. See the
previous page on how to lower the treadmill after folding it up.
CABLE STORAGE:
You may use the Cord Anchor (98) to store the Power Cord (91) when it is not
in use. Do not lay it on the ground to avoid cord damage.
E F
Spring Knob
G
Transport Wheel