15
ASSEMBLY
4. Installing the Right Side Handlebar, Speed and Hand Pulse Sensors
Connect the
Speed Buttons and Hand Pulse Sensor with Wires (63)
from the
Right Handlebar
(85R)
to the
Pulse Extension Wire (100)
and
Control Button Extension Wire (101)
from the right
side of the
Handlebar Support Tube Frame (75)
. Then connect the
Right Handlebar (85R)
to the
right side of the
Handlebar Support Tube Frame (75)
using two
Bolts (32)
, two
Spring Washers
(73)
, and two
Curve Washers (102)
. Tighten the bolts with the
5mm Allen Wrench with Phillips
Screwdriver
provided.
5. Installing the Left Side Handlebar, Incline and Handle Pulse Sensors
Connect the
Incline Buttons and Hand Pulse Sensor with Wires (62)
from the
Left Handlebar
(85L)
to the
Pulse Extension Wire (100)
and
Control Button Extension Wire (101)
from the
left
side
of the
Handlebar Support Tube Frame (75)
. Then connect the
Left Handlebar (85L)
to the
left side
of the
Handlebar Support Tube Frame (75)
with two
Bolts (32)
, two
Spring Washers
(73)
, and two
Curve Washers (102)
. Tighten the bolts with the
5mm Allen Wrench with Phillips
Screwdriver
provided.
IMPORTANT:
While sliding both
Right/Left Handlebars (85R/85L)
onto the
Handlebar Support
Tube Frame (75)
, make sure the wires are installed inside the tubes and take care not to pinch the
wires.
Hardware:
(102) Curve Washer
4PCS
(73) Spring Washer
4PCS
(32) Bolt
4 PCS
5mm Allen Wrench with
Phillips Screwdriver
1pc
Tool:
Содержание Workfit 1030
Страница 1: ...OWNER S MANUAL Treadmill 1030 9 010517...
Страница 5: ...3 LABEL PLACEMENTS...
Страница 10: ...8 OVERVIEW DRAWING...
