Exerpeutic Workfit 1030, Руководство пользователя

Страница: 18 / 33

16
Right Table Hinge
Left Table Hinge
ASSEMBLY
6. Installing the Hinges
Install both the Right/Left Table Hinges (79R/79L) to the right and left sides of the Handlebar
Support Tube Frame (75) . Then attach the Table (64) onto both the Right/Left Table Hinges
(79R/79L) with four Hexagon Socket Head Cap Bolts (86) . Tighten the bolts with the 5mm Allen
Wrench with Phillips Screwdriver provided.
7. Installing the Table to the Table Angle Adjustment Tube
Lift the Table Angle Adjustment Tube (68) up onto the Table Angle Adjuster (70) which is under
the Table (64) . The angle of the Table (64) can be adjusted. There are 4 levels of incline for the
Table (64) . After choosing your level of incline, secure the Table (64) in place by screwing in the
Knob (74) . Place the Safety Tether Key (71) onto the Computer (72) . If the Safety Tether Key
(71) is not placed onto the Computer (72) , the unit will not operate.
Hardware:
(86) Hexagon Socket Head Cap Bolt
4 PCS
(74) Knob
1 PC
5mm Allen Wrench with
Phillips Screwdriver
1PC
Tool: