Exerpeutic Workfit 1030, Руководство пользователя

Страница: 14 / 33

12
ASSEMBLY
1. Installing the Handlebar Support Tube Frame
As you are installing the Handlebar Support Tube Frame (75) , connect the Sensor Cable II (30)
from the inside of the Handlebar Support Tube Frame (75) to the Sensor Cable I (29) which is
inside the right side of the Stabilizer (57) . Slide the Handlebar Support Tube Frame (75) into the
Stabilizer (57) and align the bolt holes. Secure the frame in place with six Bolts (32) and six
Spring Washers (73) . Tighten the Bolts (32) with the 5mm Allen Wrench with Phillips
Screwdriver provided.
IMPORTANT:
While sliding the Handlebar Support Tube Frame (75) into the Stabilizer (57) ,
make sure the cables are installed INSIDE the tube and ensure that you do not pinch the wires.
Hardware:
(32) Bolt
6 PCS
(73) Spring Washer
6 PCS
5mm Allen Wrench with
Phillips Screwdriver
Tool: