Welding procedure
MIG/MAG welding
099-00L104-EW501
17.01.2022
41
6
Welding procedure
The welding task is selected in the JOB selection menu (material/wire/gas)
> see 5.6.1 chapter
.
The basic settings of the relevant welding procedure, such as operating mode or arc length correction,
can be selected on the main screen on the process parameter panel
> see 4.3.2 chapter
.
The program sequence settings are set in the program sequence menu
> see 5.6.3 chapter
.
6.1 MIG/MAG welding
6.1.1 Operating modes
There are optimum pre-sets for welding parameters such as gas pre-flow and burn back, etc. for
numerous applications (although these can also be changed if required).
6.1.1.1 Explanation of signs and functions
Symbol Meaning
Start of welding
End of welding
Shielding gas flowing
I
Welding output
Wire electrode is being conveyed
Wire creep
Wire burn-back
Gas pre-flows
Gas post-flows
Non-latched
Non-latched special
t
Time
P
START
Start program
P
A
Main program
P
END
End program
