Operating the machine control
Machine configuration (system)
30
099-00L104-EW501
17.01.2022
5.4.7 Xnet machine
The Xnet machine defines the system component required for operating the Xnet system as part of the
Expert 2.0 Net/Gateway to connect to power sources or to record welding data.
5.4.7.1 Coupling mobile machines
QR code for coupling mobile end devices. Upon a successful connection, welding data are displayed on
the end device.
Figure 5-5
Item Symbol Description
0
1
QR code
2
Menu navigation
Skip back to previous menu
3
Reset message
The message can be reset and a new QR code may be requested from the network.
5.4.7.2 Component identification
Bar codes predefined in ewm Xnet are recorded with a manual scanner. Component data are retrieved
and displayed in the control.
Figure 5-6
Item Symbol Description
0
1
Component data
2
Menu navigation
Skip back to previous menu
3
Reset message
The message can be reset
5.4.7.3 Component details
Figure 5-7
Item Symbol Description
0
1
Component data
2
Menu navigation
Skip back to previous menu
