Evolis Unitech Securion, Руководство пользователя

Страница: 46 / 56

45
T Th he e p prriin ntt q qu ua alliittyy iis s n no ott s su uffffiic ciie en ntt
1. The contrast and brightness parameters must be modified.
■
Lack of contrast and color saturation: increase the contrast and brightness parameters
in the print driver configuration
2. The type of card used may be inappropriate
■
Make sure the type of cards used corresponds to the required specifications
See the “Technical Card” chapter in this manual for more information
T Th he e tte exxttu urre e o off tth he e c ca arrd d iis s rro ou ug gh h o orr n no ott p pe errffe ec cttllyy fflla att
Try to print using another type of card.
P Pa arrttiia all o orr iin nc co orrrre ec ctt p prriin nttiin ng g
1. Check the parameters defined for the printing
■
Make sure no element of your formatting is outside the print margins
■
Check the orientation of the document selected in the configuration of the print driver
(Landscape or Portrait)
2. Check the printer interface cable
■
If some unusual characters print out, make sure you are using the interface cable
appropriate for your printer
■
Check the connection to the computer and to the printer
■
Try using another cable of the same type.
3. Make sure the printer is clean
■
Clean the inside of the printer, the cleaning rollers and the print head, if necessary
See the “Maintenance” chapter of this manual.
4. Make sure the cards are clean
■
Make sure they are stored in a dust-free location.
5. Make sure the print head is clean
See the procedure for cleaning the print head in the “Maintenance” chapter of this manual.
6. Check the ribbon
■
Make sure its position in the printer is correct
■
Make sure it is unrolling correctly
7. Check the print head
■
If horizontal (white) lines appear on the card, some components of the print head
may be dirty or damaged
■
Clean the print head
Consult the “Maintenance” chapter for more information
■
Si le problème n’est pas résolu après nettoyage, contactez votre revendeur pour
un remplacement de la tête d’impression