Evolis Unitech Securion, Руководство пользователя, Страница: 41 / 56

40
7. The head is put back in place.
8. Close the printer cover. The print head is now installed.
S Stte ep p 3 3 -- S Se ettttiin ng g tth he e p pa arra am me ette errs s o off tth he e n ne ew w p prriin ntt h he ea ad d
1. Power up the printer and make sure it is properly connected to a computer
on which the Securion printer print driver is installed.
2. Under print driver Properties, click on the “Tools” dialogue box.
3. In the “Dialogue with the printer” portion, enter the following command: Pkn;x
X = the print head kit number that you read in Step 2
Example: if the print head kit number is: 179-004-00048, you must enter the command: Pkn;179-004-00048
If the print head kit number is not entered correctly, printer malfunctions can occur.
S Stte ep p 4 4 -- C Clle ea an niin ng g tth he e p prriin ntte err
On the printer display, the message Need Cleaning appears.
Cleaning is absolutely required after a print head change.
No printing should be started before this operation has been completed.
Refer to the Clean Card Feed Module chapter to perform this operation.
Also service the cleaning roller and replace cards and ribbons.
Your Evolis printer is again ready to personalize your cards.
5. Insert the head vertically into the two
guides so as to lock the fork lugs into
their seats. 6. Turn the print head by pressing the top of
the metal piece in order to clip it into the
spring-mounted part.