Evolis Unitech Securion, Руководство пользователя

Страница: 15 / 56

14
To adjust the thickness of the cards from the inside of the printer:
R Re em mo ovviin ng g tth he e p pe errs so on na alliizze ed d c ca arrd ds s
Once the personalization cycle is completed, the
card is delivered in the hopper located on the left
side of the unit.
The user can choose from among 3 ways of ejecting the card:
■
Front face visible - First card under the stack
■
Rear face visible - First card on top of the stack
■
Ejection in the position of the card as it comes out of the lamination station.
The definition of this method is done through the Properties menu of the print driver.
Please refer to the Chapter on Drive Properties for more information.
1. Open the cover of the
printer by pressing on
the opening handle and
turning it.
2. Remove the ribbon if it is
in the printer. Then adjust
the thickness of the cards
used by moving the
handle from right to left to
the desired card
thickness.
3. Re-install the ribbon in
the printer, then close the
cover.