Evolis Unitech Securion, Руководство пользователя, Страница: 13 / 56

12
IIn ns stta alllliin ng g tth he e c ca arrd ds s
T Tyyp pe es s o off c ca arrd ds s
The Securion printer supports PVC cards varying in thickness between 0.25 mm (10 mil) and
1 mm (40 mil). For optimum quality, these cards must comply with ISO Standard 7810.
They are of a number of types:
■
Blank cards
■
Magnetic stripe cards
■
Contact smart cards
■
Contactless smart cards
■
Smart cards and magnetic stripe
Correct positioning of the magnetic stripe cards and of the contact smart cards in the feeder must
be scrupulously observed. Failure to comply with the direction of insertion would prevent the enco-
ding option from functioning.
In the most common procedure, the cards are laminated after printing. This operation requires that
the card be heated to a high temperature, which could cause it to be slightly deformed due to the
heat and the stresses created by the film when it cools.
Evolis recommends the use of cards specially designed for lamination.
For more information, contact your Evolis dealer who will provide guidance in making the choice.
IIn ns stta alllla attiio on n iin n tth he e ffe ee ed de err
The cards are installed in the feeder as follows:
1. Open the
printer cover 2. Remove the
feeder as
indicated.
3. Insert the
cards into the
feeder as
indicated,
printable face
down. 4. Adjust the gauge
setting in terms
of the thickness
of your cards.