Evolis Unitech Securion, Руководство пользователя

Страница: 12 / 56

11
F Fiillm m ffo orr lla am miin na attiio on n
The lamination unit includes components heated to high temperatures. Make sure not to
put your fingers inside the module. Follow the safety instructions
4. Position the film, engaging it in the film guide
provided for this purpose, taking care not to
damage it.
5. Once the film is in place, carefully push each core
back gradually until it comes to a stop on the
bottom of the bracket. Then make sure the film
moves freely, without creasing.
3. Insert the two cores about 1 inch
onto the brackets
2. If necessary, carefully
remove the existing
film, taking care not to
bend or twist it.
Introduce your
film, holding it in both
hands with the full
spool in the right
hand. Hold the ribbon
as indicated in the
diagram.
6. Reclose the
printer cover
1. Open the
printer cover
Installation of the print ribbons and laminating films must be accompanied by adequate
defining of the parameters of the print driver.
Please refer to the chapters on Properties of the Driver for additional details.