1. Remove the backrest from the booster
seat.
See "Converting Seat into Backless Booster" (pg. 60).
2. Move user guide to storage slots
underneath base.
3. Place the booster seat on the vehicle seat.
Make sure the booster seat is in the upright
position.
4. Set the child in the booster seat.
Make sure the child’s back is flat against the
vehicle seat and the child’s bottom is flat against
the booster seat.
5. Secure the child and booster seat to the
vehicle seat.
Stretch the lap/shoulder belt across the child and
fasten the buckle.
6. Use the shoulder belt clip, if necessary.
If the vehicle’s shoulder belt naturally crosses
the child’s shoulder, you do not need to use the
shoulder belt clip. If the shoulder belt does not
properly lay midway between the child’s shoulder
and neck, attach and adjust the belt clip. See
"Using the Shoulder Belt Clip" (pg. 61).
7. Check your work.
Make sure the lap belt is stretched low and snug
across the child’s hips, beneath the belt guides,
and fastened into the buckle. The shoulder belt
must cross the child midway between his/her
shoulder and neck.
IMPORTANT:
Always secure the booster seat
with the vehicle seat belts when not occupied.
An unsecured booster seat can fly into and injure
other occupants in the event of a crash.
62
Backless Booster Installation Checklist
The shoulder belt
MUST NOT
cross the child’s neck
or fall off the child’s shoulder. If you cannot adjust the
shoulder belt to properly lay midway between the child’s
shoulder and neck, try another seating location or do not
use the booster seat.
WARNING!
DEATH or SERIOUS
INJURY can occur.