2009-2018 Ram 1500
ADD Lite™ Front Bumper Installation Instructions
Addictive Desert Designs® | Page 1
ADDICTIVE DESERT DESIGNS
®
Preparation:
• Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake.
• We recommend reading through the installation instructions in whole before performing the work.
• Estimated Installation Time:
2 Hours
**This installation requires 2 people for best results**
You will need the following tools:
- Ratchet
- 18mm Socket
- 9/16" Socket & Wrench
-
Utility
Knife
Included in Kit:
8
- Hex Head Bolts
(3/8-16 x 1")
16
- Flat Washers
(3/8")
8
- Nylon Lock Nuts
(3/8"-16)
Removal:
1. From underneath the front driver side of the vehicle, unplug the main fog light and parking sensor harnesses.
(Fig A)
Fig A
2. From underneath the truck, remove the 18mm Nuts (3 per side) holding the bumper to the frame rails. Then,
remove the bumper from the vehicle. (Fig B)
Fig B
