28
ALWAYS
store the tether strap (pg. 71). Never use tether
strap when child restraint seat is rear-facing.
1. Make sure vehicle is on level ground.
2. Place child restraint
rear-facing
on approved vehicle
seat. Always make sure the bottom of the child
restraint sits flat on the vehicle seat.
3. Remove Lower Anchor Connectors from sides of the
seat (pg. 24).
CHECK
Lower Anchor strap is in rear-
facing belt path (pg. 27).
4. Lift up on the
recline handle as
shown and adjust
the seat to one of
the three rear-
facing recline
positions,
so
that the level
line is parallel
to the ground.
IMPORTANT:
Infants may have difficulty breathing
when in an upright seated position. Make sure they
recline enough for their head to lie back comfortably
and safely. Failure to properly recline the child restraint
could increase the child’s risk of serious injury or death.
5. Ensure child restraint is secure using the appropriate
connector on pages 29 - 31, then continue with Steps
6 - 8 on pg. 32.
Rear-facing Installation with Lower
Anchor (UAS) Connectors
Shoulder
straps mus
t
be a
t or jus
t
belo
w child’
s
shoulder
s
1,8 -
18,1
kg (
4 - 4
0 lb
s)
43 -
102
cm
(17 -
40
in)
MU
ST b
e lev
el w
ith
grou
nd w
ith R
ear F
acin
g
insta
llatio
ns
REAR F
ACING LINE
Top o
f he
ad
MUS
T be 2
.5 cm
(1 in.
) or mor
e
belo
w t
op o
f
he
adr
est or shell
Che
st clip
258084
32 8
/19
Lap Shoulder Belt
LAT
CH /
UA
S
Lap Belt
Rout
e shoulder belt
only thr
ough lock o
ff.
See us
er manual
for
additional inf
orma
tion.
LOCK OFF
REAR F
ACING
BEL
T P
ATH