68
Place baby in the child restraint.
The baby’s back and
bottom should be flat against the restraint.
If
there is a gap, the baby will not be comfortable.
1. Push the harness release
button on the front of the
seat. At the same time, pull
on the harness straps.
2. Unbuckle harness and
unfasten chest clip.
Store buckle tongues in
Buckle Tongue Pockets if
available.
Place child in child
restraint. Check crotch
buckle position. See pg.
67 for correct crotch
buckle positions and to
change positions.
Bring each harness strap
over the child’s shoulders.
3. In
Rear-facing
mode,
start with the headrest
in its lowest position.
Adjust headrest so
harness straps are
at or
just below
the child’s
shoulders.
In
Forward-facing
mode, start with
headrest in its highest
position. Adjust headrest so harness straps are
at or
just above
the child’s shoulders.
NOTE:
The child’s head should be centered within
the headrest.
Button
Securing the Child in the Child Restraint