Rear-facing
73
3. Fasten the aircraft seat
belt.
4. The aircraft seat belt must be as tight as possible.
Route the excess seat belt strap back through the rear-
facing belt path opening, as shown above. Reconnect
the seat pad to the front of the child restraint. Using
your full weight, push the child restraint firmly onto
the aircraft seat while pulling on the excess seat belt
strap to tighten.
Check your work.
Try to move the child restraint
in all directions. If you can move the restraint more
than 2.5 cm (1 in.) side to side or front to back at the
rear-facing belt path, the aircraft seat belt is not tight
enough, and you
MUST
install again until the seat belt
is tight.
PLACE
A
T
ARMPI
T
Excess
belt
Aircraft
belt
CLICK!
Installing Child Restraint Rear-
facing in Aircraft