User’s Manual
5-10
Advanced Menu
I/O Device Configuration
Configures serial and parallel ports. The following explains the parameters of
this menu item.
Serial port A/B
Enables or disables the serial ports, or follows
the operating system’s configuration.
Parallel port
Enables or disables the parallel port or follows
the operating system’s configuration.
Base I/O address (/IRQ) Sets up the I/O address and IRQ channel for
the configured serial or parallel port.
Mode
Defines the configured serial or parallel port’s
mode.
Floppy disk controller
Enables or disables the floppy disk controller.
Mic In / Spdif Out
Selects the mode for the Microphone jack.
TV port
Selects the TV standard for the TV port.
PS/2 Mouse
Setting to “Disabled” will disable both the trackpad and the attached external
PS/2 mouse. To enable both, just set to “Enabled.” “Auto Detect” enables
either device if present.
Large Disk Access Mode
Selects the type of operating system in use. Large Disk Access mode controls
how the disk controller accesses the disk volume. Setting to “Other” option
may cause the hardware not to recognize DOS, Windows or other DOS-based
operating system disk formats.
Installed OS
Selects the operating system you install.
