User’s Manual
4-2
Replacing the HDD
The hard disk drive is contained in a case. Please follow the steps below to
replace the drive:
1) Remove the two screws on each side of the case.
Note: The location of the two screws may vary depending on the types
of hard disk drive.
2) To separate the drive from the case, gently disconnect the cable con-
nected between the drive and case.
Note: Be careful not to bend any pins or crimp the cable.
3) Place a new HDD into the case and connect the cable between the
drive and case.
4) Install back the two screws on each side of the case.
