Instruction Manual ZHK
V07-21.0
17/140
-
To prevent the formation of by stirring up dust deposits, all internal and exter-
nal device surfaces must be continuously cleaned.
-
To avoid static charging, cleaning work may only be performed with a wet
cloth.
2.4 Conformity with directives, regulations and laws / Assembly instructions for
safe and compliant operation
2.4.1
EC declaration of conformity in accordance to EC machinery directive
2006/42/EC
For an AHU (or any part thereof) supplied by EUROCLIMA, an EC declaration of conformity in ac-
cordance with the EC Machinery Directive 2006/42/EC will be issued.
When the AHU is a part of the building system. For
the device’s
safe, practical and intended opera-
tion, it is the responsibility of the customer to make sure that all on site works are carried out before
the device can commence operations. This preparation is necessary and vital for the device and
system to work effectively. These types of works are described in
chapter 2.4.2 (Installation in-
structions for a safe and compliant installation in the building system)
and in the following
chapters of this instruction manual.
The AHU must be mounted and operated professionally, according to the specifications stipulated
in this instruction manual. The safe operation of the AHU in the overall building system is thus the
responsibility of the customer.
The CE-conformity / EC declaration of conformity applies for the delivery state of the AHU.
In the mounted state, the AHU fulfills the requirements of the specified European directives
and harmonized standards only if the instructions and information in this instruction man-
ual are carefully observed and implemented.
The issued EC declaration of conformity declares that due to its concept and type, as well as in de-
sign placed into the market by EUROCLIMA, the AHU complies with the fundamental health and
safety requirements of the EC Machinery Directive 2006/42/EC.
EUROCLIMA thus follows the Eurovent interpretation of the Machinery Directive:
[Eurovent 6/2-
2015 “Recommended code of good practice for the
interpretation of Directive
2006/42/EC on machinery concerning air handling units”, vom 19. Oktober 2015.]
Applied European directives and harmonized standards:
Every AHU by EUROCLIMA is a customized produced unit. Therefore, please refer to unit specific
EC declaration of conformity of the delivered AHU for information on the applied European direc-
tives and harmonized standards.
Depending on the particular application and country-specific requirements and laws it is possible,
that the AHU does not meet the valid requirements at the ordered state at delivery.
Therefore, you the customer and installer of the AHU are responsible, before commission-
ing of the AHU, to check the conformity of the entire system to the valid laws and directive.
If there are any doubts about the conformity of the AHU with the local (on site) valid laws and direc-
tives, the AHU is only allowed to be put into operation, if the conformity of the AHU in the system is
unequivocally guaranteed.
Содержание ZHK
Страница 1: ...ZHK INSTRUCTION MANUAL...