Euroclima ZHK, Руководство пользователя

Страница: 76 / 142

Instruction Manual ZHK
V07-21.0 75/140
1. Flexible tube length:
-
The flexible tube length L is delivered in standard with L = 180 mm. For some installations
shorter tubes may be installed. In this case cut the flexible tube to match the drawing in
Figure
170
.
-
Ensure, that the free distance between the two ends of the rigid (grey) tubes is not less than
20 mm and not more than 60 mm according the drawing.
-
Ensure that the (black) flexible tube covers the (grey) rigid tube ends at each side for a length
of 60 mm according to the drawing.
-
Mark the correct position of the flexible tube on the rigid tube (60 mm length) before installing
the flexible tube.
2. Install the flexible tube and clamps
-
Clean the plastic tubes and flexible connector tube carefully with a dry, clean cloth
-
Check that the correct clamps are being used
: The clamps are imprinted with “NORMA” and
the size range must be as indicated in
Table 9
.
NOTICE!
Do not apply any lubricant between the black flexible tube and the rigid
(grey) tube. This could degrade the flexible rubber tube and reduce the
safety and integrity of the connection.
Do not use any benzene based cleansing products, this could damage the
rubber material.
3. Positioning of the flexible tube and clamps
-
Check if the flexible tube is positioned correctly overlapping 60 mm on each end the grey rigid
tube, according to
Figure 170
.
-
Firstly, install loosely the indicated type and number of clamps on each side of the connection.
-
Check if the clamps are positioned on each side completely within the 60 mm overlapping
length.
Figure 170:
Correct positioning of the flexible connecting tube
(black); dimensions in mm