Instruction Manual ZHK
50/140
V07-21.0
After placing all the screws loosely, they shall be tightened, starting with the base frame, in two
stages.
NOTICE!
It is important, to initially tighten the bolt connections at the base frame. This is to
ensure an exact connection of the AHU parts.
Figure 83:
Bolting delivery sections together
Reinsert the insulation and remount the external panel
At AHUs of the series ZHK 2000 in outdoor execution or with outer aluminum panels, the white
protective film must be removed from the sealing tape before mounting, this provides extra protec-
tion and adherence. (
Figure 84:
Removing the protective film
-
ZHK 2000
–
Casing type: Snap-In-Construction
Start at the bottom to mount the external panels. This should be don carefully to avoid any
damage to the panel (
Содержание ZHK
Страница 1: ...ZHK INSTRUCTION MANUAL...