Euroclima ZHK, Руководство пользователя

Страница: 34 / 142

Instruction Manual ZHK
V07-21.0 33/140
2. Lifting of heat wheel or plate heat exchanger: for assembling the crane lugs supplied by the
component manufacturer and for lifting the heat wheel or plate heat exchanger, the lifting
instructions and specifications of the respective component manufacturer must be followed.
When positioning the heat wheel or plate heat exchanger in the bottom casing part, ensure
that it fits exactly on the profiles provided for this purpose. This specifically applies, if the
heat wheel or plate heat exchanger has been delivered in several individual parts. For in-
structions on the lifting procedure, see also
chapter 3.6.2 (Lifting of heat wheel or plate
heat exchanger)).
3. Lifting of the top casing part: on the top casing part use the supplied flat crane lugs (see
chapter 3.6.3 (Assembly of flat crane lugs)
).
3. Assembly top
casing part
2. Heat wheel or
plate heat ex-
changer
1. Assembly bot-
tom casing part
Figure 28:
Assembly order of disassembled heat wheel or plate heat exchanger casing section
3.6.2 Lifting of heat wheel or plate heat exchanger
In general, when lifting plate heat exchanger, it must be ensured, that the lifting accessories are
aligned vertically. See
Figure 29
.
Figure 29:
Correct alignment of the lifting accessories when lifting plate heat exchangers