EURA E2000-0004 S2B, Инструкции по безопасности и руководство по эксплуатации

Страница: 79 / 82

18) Parameter group C00: Speed / Torque control
Speed limiting for inverter, working in torque control mode:
Selection: 0: Set by FC23
1: Analogue input AI1
FC22 Speed limiting set-point origin forward
2: Analogue input AI2
Default setting: 0
3: Analogue input AI3
4: Pulse signal input
5: Reserved
FC23 Internal speed limiting value forward Range: 0...100 % Default setting: 10%
Selection: 0: Set by FC25
FC24 Speed limiting set-point origin reverse
1: Analogue input AI1
Default setting: 0
2: Analogue input AI2
3: Analogue input AI3
FC25 Internal speed limiting value reverse Range: 0...100 % Default setting: 10%
(All values are referred to f-max
–F111)
Torque limiting for inverter working in speed control mode
Selection: 0: Set via FC30
1: Analogue input AI1
FC28 Torque limiting signal source motor mode
2: Analogue input AI2
Default setting: 0
3: Analogue input AI3
4: Pulse signal input
5: Reserved
FC29 Reference: 100% of limiting signal to motor
Range: 0,0....3,000 Default setting: 3,000
rated torque
FC30 Internal torque limiting value
Range: 0....300% % Default setting: 200%
motor mode (%)
(All referred on motor rated torque)
Selection: 0: Set via FC35
1: Analogue input AI1
FC33 Torque limiting signal source generator mode
2: Analogue input AI2
Default setting: 0
3: Analogue input AI3
4: Pulse signal input
5: Reserved
FC34 Reference: 100% of limiting signal
Range: 0,0....3,000 Default setting: 3,000
to motor rated torque
FC35 Internal torque limiting value
Range: 0....300% % Default setting: 200%
generator mode (%)
(All referred on motor rated torque)
+
Torque / Current limit for field wakening area
FC 48 Activation of secondary limiting
Selection: 0: Limiting fixed
Default setting: 0 1: Depending on frequency threshold
FC49 Sekundary torque/current limit (%) Range: 50...200 % Default setting: 120%
FC50 Start transition frequency (Hz) Range: 1.0 Hz....FC51 Default setting: 15 Hz
FC51 End transition frequency (Hz) Range: FC50...F111 Hz Default setting: 30 Hz
In V/Hz mode: To limit motor current in the field wakening area
In SLV mode: To limit torque in the field wakening area
Current / Torque
FC608/30
FC49
FREQUENCY
F50 F51
E2000+_Rev.02 -E- SOFT Rev. 5.09
- 69 -
© 2016-06-KPP-EURADRIVES EUROPE GmbH