Esse-ti Helpy L300, Руководство пользователя

Страница: 28 / 86

28 INSTALLATION
It is recommended to remove the terminals, make the connections and replace
the terminals in the correct position.
¾
Connect the local telephone (for programming and managing HelpyL300)
to the TEL terminals (irrespective of the polarity) or directly to the RJ11
connector (see “A” in the picture at page 24).
¾
Connect the handsfree terminals and the emergency buttons:
You can install up to 3 independent handsfree terminals:
¾
Handsfree 1 in the CAR: VV1+,VV1-
¾
Handsfree 2 on the ROOF: VV2+,VV2-
¾
Handsfree 3 in the PIT: VV3+,VV2-
Beware of terminal polarity.
The total number of active hands-free terminals must correspond to the type of
installation programmed in the device (please see “Type of installation” at page
41); the association between alarm buttons and handsfree terminals is made
according to the type of installation, as follows:
Type of installation 1 :
HANDSFREE 1 (VV1+, VV1-)
Button 1 corresponds to HANDSFREE 1;
also buttons 2 and 3 (optional)
correspond to HANDSFREE 1
BUTTON 1
BUTTON 2
(OPTIONAL)
BUTTON 3
(OPTIONAL)
VV1
Type of installation 2 :
HANDSFREE 1 (VV1+, VV1-);
HANDSFREE 2 (VV2+,VV2-).
Buttons 1 e 3 (3 is optional) correspond
to HANDSFREE 1, button 2 corresponds
to HANDSFREE 2..
VV1
VV2
BUTTON 1 BUTTON 2
BUTTON 3
(OPTIONAL)
Type of installation 3:
HANDSFREE 1 (VV1+, VV1-);
HANDSFREE 2 (VV2+,VV2-).
HANDSFREE 3 (VV3+,VV2-).
Button 1 corresponds to HANDSFREE 1,
button 2 corresponds to HANDFREE 2,
button 3 corresponds to HANDSFREE 3.
VV1 VV2
VV3
BUTTON 1 BUTTON 2 BUTTON 3