Esse-ti Helpy L300, Руководство пользователя

Страница: 46 / 86

46 PROGRAMMING
It is only possible to use figures, not letters.
Volumes setting
Installer Operator
9 9
HANDSFREE TERMINAL
The loudspeakers’ volume and the microphone’s sensitivity may be adjusted :
(handsfree) (loudspeaker’s volume)
(microphone’s sensitivity)
¾
Lift the handset.
¾
Press 80.
¾
Enter the figure related to the specific hadsfree terminal:
1 Handsfree 1;
2 Handsfree 2;
3 Handsfree 3.
¾
Enter the figure relating to the loudspeaker’s volume (from 1 to 4 ).
¾
Enter the figure relating to the microphone’s sensitivity (from 8 to 9 ).
¾
Press #.
Note: upon programming, the handsfree terminal turns on thus
making it possible to listen to and adjust volumes
accordingly.
Note: upon the same programming operation, you can enter more
than one figure relating to volume or sensitivity, until the
desired result is achieved.
Example: in order to set the highest loudspeaker’s volume and
microphone’s sensitivity on handsfree 1 , dial :
.
Example: in order to set the lowest loudspeaker’s volume and
microphone’s sensitivity on handsfree 2 , dial:
.