Esse-ti Helpy L300, Руководство пользователя

Страница: 32 / 86

32
WARNING
If the alarm procedure is activated by mistake and
you have not programmed the telephone number or
you have programmed a wrong number, and IT IS
IMPOSSIBLE TO INTERRUPT THE ALARM
PROCEDURE FROM REMOTE, please follow the
procedure below: Lift the handset of the local
telephone and enter * <Key word> # within 20
seconds (by default:
)
. The alarm ends
and the device returns to the idle state.
3. ANSWERING THE ALARM AND RESETTING IT
From the called number answer the call and:
¾
Dial . You will hear the identification message you recorded.
¾
Dial . You will go into handsfree mode.
¾
Dial . After about 2 seconds dial .
Note: in case the handsfree termianl’s volumes are not adequately
set, refer to paragraph “Volume setting” at page 46.
HOW TO USE THE RESET PUSHBUTTON
Reset pushbutton (R in picture at page 24):
•
Pressing shortly
Allows to interrupt an alarm call.
By pressing shortly you get the same result as lifting the handset of the local
telephone and entering : * <Password> #.
•
Pressing longer (15 seconds)
Allows to reset the device.
By pressing longer, Helpy L300 will be re-started with no need to
disconnect the mains cable or the battery.
The reset operation does not alert the previously set parameters.