ESPEC Platinous ESL Series, Руководство пользователя

Страница: 116 / 125

Appendix
110 Platinous User’s Manual
9. Construction
9.1. General Material
9.1.1. Exterior Stainless Steel Sheets, 18GA (SS430).
9.1.2. Interior Stainless Steel Sheets, 20GA (SS304).
9.1.3. Insulation Fiber Glass and Foam Glass.
9.1.4. Thermal Break Support Frame Molded Unsaturated Polyester Resin.
9.1.5. Gasket Silicone.
9.2. Door
9.2.1. Door Handle Recessed Door Handle on Right Side and Hinges on Left.
9.3. Heater Nichrome Wire Heater at 208V
Model Heater
ESX-2C 3 KW
ESX-3C 3 KW
ESX-4C 6 KW
9.4. Humidifier Sheathed Heater made of SS316
(Surface Evaporating System).
9.5. Cooler and Dehumidifier Aluminum Fin Coil.
9.6. Circulator Sirocco Fan.
9.7. Machinery Compartment
9.7.1. Refrigeration System Mechanical Cascade Refrigeration System.
9.7.2. Compressor 2 HP x 2 Hermetic Compressor.
9.7.3. Condenser A = Air Cooled; W = Water Cooled.
9.7.4. Expansion System Expansion Valve and Capillary Tube.
9.7.5. Refrigerant Non CFC.
9.8. Water Supply Compartment Wick Pan Regulator and Humidity Re gulator.
* De-Ionizing Cartridge Optional.
9.8.1. Inside Refrigeration Service Taps.
9.8.2. Right Side Water and Drain Connection Port.
9.9. Cable Port Inside Diameter: 4” (100 mm), Left Side,
Center of Workspace.
9.10. Instrumentation Panel
9.10.1. Model Temperature and Humidity Controller: SCP -220.
9.10.2. Overheat Protector
Setting Range -99 to 199°C (-146 to 390°F).
Sensor Thermocouple Type T.
9.10.3. Running Time Meter Non-Resettable Range to 99999.9 hrs.
10. Safety Devices
10.1. Electrical
Devices Purpose
10.1.1. Main Disconnect (Circuit Breaker) Protection of Equipment
10.1.2. Thermal Fuse Protection of Equipment
10.1.3. Overheat Protector Protection of Specimens
10.1.4. Refrigeration High Pressure Switch Protection of Equipment
10.1.5. Refrigeration Compressor Overheat Sensor Protection of Compressor
10.1.6. Motor Protector Protection of Compressor
10.1.7. Fuse for Heaters Protection of Equipment
10.1.8. Thermal Switch (Internal to Circulator) Protection of Equipment
10.1.9. Fuse for Control Circuit Protection of Equipment
10.1.10. Specimen Power Supply Control Terminal Protection of Sp ecimens
10.1.11. External Alarm Terminal Protection of Equipment
11. Accessories
11.1. Wet Bulb Wick Pack Contains One (1) Set of 24 Wicks.
11.2. Brush One (1) Brush for Cleaning the Humidifier.
11.3. Cable Port Plug Qty: Two (2) .
11.4. Manuals Instruction Manuals (Chamber and Controller).
Replacement Parts Lists.