30
Addressable Fire Panel MAGPRO96
- Installation and Programming Manual
MAGPRO-DBSS - Base with sounder and strobe
Fig. Screen 9(h) - MAGPRO-DBSS base with sounder and strobe.
On Fig. Screen 9(h) is shown the MAGPRO-DBSS (base with sounder and strobe) settings screen. Choose the
“MORE” button to enter a screen with additional settings:
•
Mode
- Press to choose from a list the mode of operation of the sounder:
Strobe lamp
(only the strobe light is active
in case of fire alarm event);
Sound
(only the sound is active in case of fire alarm event);
Sound/Strobe
(both the strobe
light and sound are active in case of fire alarm event);
•
Sound Level
- Every pressing of the button alternatively changes the sound level between HIGH/ LOW – as this
depends on the number of the connected sounders to the loop:
- HIGH – Set in those cases when the number of the connected sounders to the loop is up to 30 (DBS and DBSS).
- LOW – Set in those cases when the number of the connected sounders to the loop is up to 100 (DBS and DBSS).
At the bottom of the screen is shown in addition the Software Revision of the device in a separate field.
To save the new setting press the “Apply” button on the main screen of the device.
Attention: It is possible to connect different type of sounders to the loop at the same time, but the
total consumption of the sounders in the loop must be up to 300mA!
Note: The automatic detectors mounted to bases MAGPRO-DBS and MAGPRO-DBSS are assigned at
separate addresses in the control panel!
To calculate the total consumption of the sounders in the loop and to define the proper sound level, you can use the
Table a below, as fill in the number of the used sounders according their type.
Table 1 for calculation of the total consumption of the sounders in the loop and defining the sound level:
Sounder
Number
HIGH*
Sound Level
LOW**
Sound Level
Total consumption, mA
(HIGH + LOW)
WS
____ x 9,5mA
____ x 5mA
WSS
____ x 9,5mA
____ x 5mA
DBS
____ x 9,5mA
____ x 3mA
DBSS
____ x 9,5mA
____ x 3mA
Consumption of the sounders in the loop:
* Note: HIGH Sound Level - Up to 30 sounders WS and WSS type; Up to 30 sounders DBS and DBSS type.
** Note: LOW Sound Level - Up to 60 sounders WS and WSS type; Up to 100 sounders DBS and DBSS type.
