P
AGE
155
T
UNE
B
ASE
200 I
NSTALLATION
& U
SER
’
S
G
UIDE
- M21201-01A1
A
PPENDIX
H - R
EMOTE
O
VERVIEW
a.
Press TV once. The LED will blink twice.
b. Enter the TV code for your TV/VCR Combo. If correct, the LED will blink
twice.
If there is no separate TV code listed, you will need to perform the following steps to
access volume control:
a.
Press and hold SETUP until the LED blinks twice, then release SETUP.
b. Enter 9 - 9 - 3 . The LED will blink twice.
c.
Press DVD once. The LED will blink twice.
Searching for Your Code
If your device does not respond to the Remote after trying all codes listed for your
brand, or if your brand is not listed at all, try searching for your code. For example, to
search for a code for your TV:
1.
On the Remote, press TV once.
2.
Press and hold SETUP until the LED blinks twice, then release SETUP.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.
Aim the remote control at the TV and slowly alternate between pressing PWR and
TV. Stop when the TV turns off. NOTE: In the search mode, the Remote will send IR
codes from its library to the selected device, starting with the most popular code
first.
5.
Press SETUP once to lock in the code.
6.
To search for the codes of your other components, repeat steps 1 through 5, but