P
AGE
50
T
UNE
B
ASE
200 I
NSTALLATION
& U
SER
’
S
G
UIDE
- M21201-01A1
C
HAPTER
3 - G
ETTING
S
TARTED
!
To add a new changer, make
sure the changer number is
set to 1.
Attach the appropriate
connections (see Chapter 2).
Power the changer On.
Insert discs. If discs are
already inserted, simply
open and close the changer
door.
This will start the Autobuild
process which is the
downloading of information
regarding your CD collection.
If it finds new CDs, TuneBase 200 will initiate a connection to the CDDB database on
the Internet to get data for your new CD.
If you remove discs and put others back in the same slot, you will have to manually
initiate a detailed lookup such as
lookup range
in the
changer management
section
in SETUP. The GET MUSIC INFO screen will report the status of the lookup progress
until it is complete, or you press STOP to cancel the operation.
Adding or Removing Changers
If a changer has been attached to TuneBase 200, removed, and then re-attached,
TuneBase 200 will assume that the disc collection has not changed. If you have made
disc changes to TuneBase 200, you should manually go to the
changer
management
section in SETUP and check all discs to insure that all discs are
recognized.
When you remove a changer, the CD titles and playlists still appear in the guide.
However, when you choose a title or a playlist, TuneBase 200 provides a message
stating that a changer is not connected and that the music selection or playlist is not
available and cannot be played.
