P
AGE
157
T
UNE
B
ASE
200 I
NSTALLATION
& U
SER
’
S
G
UIDE
- M21201-01A1
A
PPENDIX
H - R
EMOTE
O
VERVIEW
Re-Assigning Device Keys
The Remote can be set up to control a second TV or VCR, or any combination of eight
home entertainment components. For example, to have the Remote control a TV, a Cable
Converter, and two VCRs, you will need to reassign the unused AUX key to operate the
second VCR as follows:
1.
On the Remote, press and hold SETUP until the LED blinks twice, then release SETUP.
2.
Enter 9 - 9 - 2. The LED will blink twice.
3.
Press DVD once, then press AUX once.
4.
The AUX key is now ready to be programmed for your VCR. See Programming Component
Control. To reassign other device keys, repeat steps 1 through 4 by substituting the key
sequence from the below chart for the most popular components:
To Re-Assign Key Sequence
Perform
TV as VCR key:
SETUP - 9 - 9 - 2 - DVD - TV
TV as 2nd CBL key:
SETUP - 9 - 9 - 2 - CBL - TV
TV as 2nd AUX key:
SETUP - 9 - 9 - 2 - AUX - TV
TV as 2nd RCV/TNR key:
SETUP - 9 - 9 - 2 - RCV - TV
TV as AMP key:
SETUP - 9 - 9 - 2 - PP - TV
TV as CD key:
SETUP - 9 - 9 - 2 - TB - TV
TV as SAT key:
SETUP - 9 - 9 - 2 - FB - TV
TV back to TV:
SETUP - 9 - 9 - 2 - TV - TV
!
You cannot re-assign the FB,
TB, or PP keys.
However, the keys can be
used in conjunction to re-
assigning other device keys.