P
AGE
117
T
UNE
B
ASE
200 I
NSTALLATION
& U
SER
’
S
G
UIDE
- M21201-01A1
Remote/Keyboard Commands
The Remote/Keyboard commands are used when the video output of the TuneBase 200
system is displayed on a TV or large screen projector and it is desired to directly select
the TuneBase 200 control functions through an external control system.
The up, down, left, right, and select functions can be used to navigate objects on the
screen and select them. The active TuneBase 200 control function is highlighted and the
selection cursor is moved over it.
Various other commands are used to mimic the operation of the remote control. Note that
the command response will be “OK” as long as the key code is a valid one, even though
the system may ignore the key if the system is in a mode where the key would not
normally be processed. The exception to this is when power is in “standby”, where all
keys except for the “Power Toggle” or “Power On” command will return a response of
“not available during Power Standby”.
A
PPENDIX
D- E
XTERNAL
C
ONTROL
P
ROTOCOL
