Esaote MyLab XPro75, Начало работы

Страница: 60 / 144

M Y L A B O V E R V I E W
MyLab
- G E T T I N G S T A R T E D 3 - 10
Probe Connectors and Cable Management
Four probe connectors (10) are located on the front of the console. All
connectors can be occupied simultaneously, but only one probe at time can
be active.
Probe Connector Locks (11) are placed above the probe connectors.
Make sure that the Probe Connector Lock is positioned on the right (open
position) and carefully attach the probe connector by placing the cable feed-
through downwards. To secure the probe, move the securing device towards
left (locked position).
WARNING
Do not touch the probe connector pins or the probes receptacle.
Never disconnect the probe while it is active. Press
FREEZE
before
disconnecting the probe.
CAUTION
Check to correctly align the probe connector before inserting it. Close the
connector-securing device only after having completely inserted the
connector.
When a transducer is not in use, store it in one of the probe holders (15) on
the sides of Control Panel Assembly. Always loop transducer cables over the
cable hangers (6) to prevent cables from being stepped on or run aver by the
cart wheels.
Peripherals Housing
The console top is equipped with a peripheral plate (19) to house peripheral
devices. Those devices can be any combination of the following devices: a
black-and-white printer, a color printer, and a DVD recorder. The peripheral
can be easily connected and disconnected and secured to the device console
with belts.
A dedicated storage area (7) for B/W thermal USB printer is located on the
left side of the console.