Esaote MyLab XPro75, Начало работы

Страница: 126 / 144

P E R F O R M I N G A N E X A M
MyLab
- G E T T I N G S T A R T E D 7 - 7
Smart Preset
After exam starts, at the right side of the touchscreen, presets for the active
probe and application are shown.
When the preset is changed during the exam tapping one of them on the
touchscreen, all acquisition parameters are reset while the geometrical
characteristics (such as depth, size) are maintained.
Performing the Exam
MyLab
offers a set of imaging modes to cover a variety of imaging needs. By
pressing the different mode buttons (
B
,
M
,
C
,
PD /TVM
,
PW
,
C W
) the specific
mode is activated in real time. If the same button is pressed again,
MyLab
automatically returns to the previous presentation.
Special modes are also available for 3D imaging and advanced imaging.
Touchscreen buttons change according to the activated mode.
When more modes are active, the navigation tabs ( B-MODE , M-MODE ) allow
the operator to scroll among the specific mode menu. If the displayed menu
has several levels, swipe left/right to scroll through all functions.

AO
The control panel buttons and the commands displayed on the touchscreen
make it possible to optimize presentation quality. Different menus
correspond to each format., the “Advanced Operations” manual provides a
detailed description of all active controls in the different modes.
Acquiring images
MyLab
allows to capture and save a single image or a cineloop sequence
pressing
IM AG E
or
C LIP
respectively.
These buttons respectively save still frames and clips in real time. Images are
also saved in Freeze.
Images and clips are saved in patient study and thumbnails of the saved data
are shown downwards in chronological order on the right side of the screen.
Single images are saved with full definition or compressed, whereas sequences
are compressed with a minimum loss of information.
 AO
Compression of both images and clips to be saved on external media can be
set: refer to the “Archiving” section for further information.