Esaote MyLab XPro75, Начало работы

Страница: 78 / 144

P R E P A R I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 4 - 11
GETTI
NG STARTED
LED Indicators
The two green LED indicators on the front panel give the following
information:

Both LEDs are not lighted means the gel warmer is off

Left LED is lighted means the gel warmer is on and the
temperature is set to 37°C

Right LED is lighted means the gel warmer is on and the
temperature is set to 40°C.

Both LEDs are flashing at 2Hz indicates the alarm if the gel
warmer is over temperature (higher than 42.5°C).

Both LEDs are flashing at 0.5Hz indicates the alarm if the gel
warmer faces the following conditions: temperature sensor
error, input power supply is lower than 7V, input power
supply is higher than 26V.