Ericsson FSU 995 F, Руководство пользователя, Страница: 49 / 86

47
FSU 975
Gap
Fuse
Right Left
Up
Down
Name or re-name the program
6
CHANGE PROGRAM NAME?
“
“
Confirm wish to name
Enter
Enter program name
Yes
The next step is to name--or re-name, in the case of simple
editing--the splicing program. As explained above, the pro-
gram name will be stored, with the security code and security
type, amongst the general program parameters. The splicer
will ask in the
message field , “Change program name?,” and
to do so, you press Yes .
To orient yourself within the splicing program structure, you
should take note that the step we just completed was to
change two of the general parameters listed on page 36:
KEY NUMBER and SECURITY TYPE. The other three
general parameters (PROGRAM NAME, FIBER PROCESS,
and FIBER TYPE) are changed in the following steps,
steps 6 and 7.
General parameters
The general parameters ho
Parameter
PROGRAM NAME
Entering text on the FSU 995
FA is controlled by the arrow
buttons, according to the
adjacent description. You
can also use a method of
quick character selection,
which is described on page
61 to facilitate the process.
Regardless how you enter
the name, it should be no
more than 16 characters
long, and sufficiently specific
that you will recognize it
quickly and easily.
The left arrow buttons
control the cursor position,
moving the cursor forward
or backward one letter at a
time.
The right arrow buttons
move the cursor to the
beginning or end of a line.
The up and down arrows
control character
selection, changing the
letter of the current
cursor position forward
or backward through the
alphabet.
When you have successfully typed in the new program name,
you press ENTER to save it.
ADVANCED OPERATION - Program editing