Ericsson ECN330, Руководство пользователя

Страница: 933 / 1226

Command Line Interface
927
1553-KDU 137 365 Uen D 2006-06-16
• Create a Class Map (section 7.20.3 on page 926) before assigning it to
a Policy Map.
Example
This example creates a policy called “rd_policy,” uses the class command to
specify the previously defined “rd_class,” uses the set command to classify the
service that incoming packets will receive, and then uses the police command
to limit the average bandwidth to 100,000 Kbps, the burst rate to 1522 bytes, and
configure the response to drop any violating packets.
7.20.4 class
This command defines a traffic classification upon which a policy can act, and
enters Policy Map Class configuration mode. Use the no form to delete a class
map and return to Policy Map configuration mode.
Syntax
[no] class class-map-name
class-map-name
- Name of the class map. (Range: 1-16 characters)
Default Setting
None
Command Mode
Policy Map Configuration
Console(config)#policy-map rd_policy
Console(config-pmap)#class rd_class
Console(config-pmap-c)#set ip dscp 3
Console(config-pmap-c)#police 100000 1522 exceed-action drop
Console(config-pmap-c)#