Ericsson ECN330, Руководство пользователя

Страница: 1010 / 1226

Command Line Interface
1004
1553-KDU 137 365 Uen D 2006-06-16
• If two or more routers are configured with the same VRRP priority, the
router with the higher IP address is elected as the new master router if
the current master fails.
• If the backup preempt function is enabled with the
vrrp preempt
command, and a backup router with a priority higher than the current
acting master comes on line, this backup router will take over as the new
acting master. However, note that if the original master (that is, the
owner of the VRRP IP address) comes back on line, it will always
resume control as the master.
Example
Related Commands
vrrp preempt
(section 7.24.6 on page 1005)
7.24.5 vrrp timers advertise
This command sets the interval at which the master virtual router sends
advertisements communicating its state as the master. Use the
no
form to
restore the default interval.
Syntax
vrrp < group > timers advertise < interval >
no vrrp < group > timers advertise
•
group
- Identifies the VRRP group. (Range: 1-255)
•
interval
- Advertisement interval for the master virtual router.
(Range: 1-255 seconds)
Default Setting
1 second
Console(config-if)#vrrp 1 priority 1
Console(config-if)#