Ericsson ECN330, Руководство пользователя

Страница: 532 / 1226

Command Line Interface
526
1553-KDU 137 365 Uen D 2006-06-16
For example, the following commands can be used to enter interface
configuration mode, and then return to Privileged Exec mode.
7.2.11 Command Line Processing
Commands are not case sensitive. Commands and parameters can be
abbreviated as long as they contain enough letters to differentiate them from any
other currently available commands or parameters. The Tab key can be used to
complete partial commands, or enter a partial command followed by the
?
character to display a list of possible matches. The following table shows other
editing keystrokes that can be used for command-line processing:
Table 31 CLI Editing Keystrokes
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#
Keystroke Function
Ctrl-A Shifts cursor to start of command line.
Ctrl-B Shifts cursor to the left one character.
Ctrl-C Terminates the current task and displays the
command prompt.
Ctrl-E Shifts cursor to end of command line.
Ctrl-F Shifts cursor to the right one character.
Ctrl-K Deletes all characters from the cursor to the end of
the line.
Ctrl-L Repeats current command line on a new line.
Ctrl-N Enters the next command line in the history buffer.