Ericsson ECN330, Руководство пользователя

Страница: 847 / 1226

Command Line Interface
841
1553-KDU 137 365 Uen D 2006-06-16
7.17 VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network, but
communicate as though they belong to the same physical segment. This section
describes commands used to create VLAN groups, add port members, specify
how VLAN tagging is used, and enable automatic VLAN registration for the
selected interface.
Table 89 VLAN Commands
Command Groups Function Page
GVRP and
Bridge Extension Configures GVRP settings that permit automatic VLAN
learning; shows the configuration for bridge extension MIB 842
Editing VLAN Groups Sets up VLAN groups, including name, VID and state 848
Configuring VLAN
Interfaces Configures VLAN interface parameters, including ingress
and egress tagging mode, ingress filtering, PVID, and
GVRP 855
Displaying VLAN
Information Displays VLAN groups, status, port members, and MAC
addresses 865
Configuring Private
VLANs Configures private VLANs, including uplink and downlink
ports 868
Configuring Protocol
VLANs Configures protocol-based VLANs based on frame type
and protocol 877
Configuring 802.1Q
Tunneling Configures IEEE 802.1Q tunneling (QinQ) to segregate
and preserve customer VLAN IDs for traffic crossing the
service provider network 882