Ericsson ECN330, Руководство пользователя

Страница: 566 / 1226

Command Line Interface
560
1553-KDU 137 365 Uen D 2006-06-16
Example
This example turns the SBC LED off.
File Management Commands
Managing Firmware
Firmware can be uploaded and downloaded to or from a TFTP server. By saving
runtime code to a file on a TFTP server, that file can later be downloaded to the
ECN330-switch to restore operation. The ECN330-switch can also be set to use
new firmware without overwriting the previous version.
When downloading runtime code, the destination file name can be specified to
replace the current image, or the file can be first downloaded using a different
name from the current runtime code file, and then the new file set as the startup
file.
Saving or Restoring Configuration Settings
Configuration settings can be uploaded and downloaded to and from a TFTP
server. The configuration file can be later downloaded to restore switch settings.
The configuration file can be downloaded under a new file name and then set as
the startup file, or the current startup configuration file can be specified as the
destination file to directly replace it. Note that the file
“Factory_Default_Config.cfg” can be copied to the TFTP server, but cannot be
used as the destination on the ECN330-switch.
Console#sbc ctrlled
Console#