Ericsson ECN330, Руководство пользователя

Страница: 561 / 1226

Command Line Interface
555
1553-KDU 137 365 Uen D 2006-06-16
reduces the per-packet overhead required to process protocol
encapsulation fields.
• To use jumbo frames, both the source and destination end nodes (such
as a computer or server) must support this feature. Also, when the
connection is operating at full duplex, all switches in the network
between the two end nodes must be able to accept the extended frame
size. And for half-duplex connections, all devices in the collision domain
would need to support jumbo frames.
Example
Related Commands
system mtu
(section 7.5.10 on page 555)
7.5.10 system mtu
This command sets the maximum transfer unit for traffic crossing the ECN330-
switch. Use the no form to restore the default settings.
Syntax
system mtu {< FE-size> | jumbo < GE-size> }
no system mtu
•
FE-size
- Specifies the MTU size for Fast Ethernet ports.
(Range: 1500-1546 bytes)
•
GE-size
- Specifies the jumbo frame size (MTU) for Gigabit
Ethernet ports. (Range: 1500-9216 bytes)
Default Setting
1522 bytes
Console(config)#jumbo frame
Console(config)#