Manager Mode Configuration Options:
Mode 1 Manager Mode Options
Network
3 - 7
Use DHCP
The
Use DHCP
option instructs the DHCP server on the network to allocate an IP address
for the terminal. Press the
2
key at the Network menu screen to select the
Use DHCP
option.
When you configure the terminal for DHCP communication, the terminal displays the
Setting network method to DHCP
message, then returns to the
Network
menu. Press
F3
to reboot the device.
Use Static IP
The
Use Static IP
option instructs the terminal to send a directed message to the
Equitrac control system on startup. Use this option when the device is on a different subnet
than the control system. Press the
3
key at the Network menu screen to select the
Use
Static IP
option.
When you configure the terminal for Static IP communication, the terminal displays the
Setting network method to STATIC
message, then displays the following Static IP
menu options. Press the corresponding number key to select an option.
0:Set IP Address
1:Set Mask
2:Set Gateway
3:Set Server IP
Note:
Enter leading zeros for IP address values. Use the
BACK
key or the function keys to
move back or forward through the string of characters. When the cursor is in the
desired location, use the number keys to type over the IP address characters that you
want to change.
Set IP Address
Press the
0
key at the Static IP menu screen to set the terminal’s static IP address. At the
prompt, enter the IP address and press
ENTER
. The PageCounter returns to the
Network
menu. Proceed to set the mask, gateway, and server IP before pressing
F3
.
Set Mask
Press the
1
key at the Static IP menu screen to set the subnet mask. At the prompt, enter the
subnet mask for your network and press
ENTER
. The PageCounter returns to the
Network
menu. Proceed to set the gateway and server IP before pressing
F3
.
Set Gateway
Press the
2
key at the Static IP menu screen to set the terminal’s gateway. At the prompt,
enter the default gateway on your network and press
ENTER
. The PageCounter returns to
the
Network
menu. Proceed to set the server IP before pressing
F3
.
Содержание PageCounter
