Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
68
4.4 Powering the programmer
4.4.1 Overview
The ISPnano programmer can be powered by any of the following methods:
#
Function
Voltage range
Further description
1
Using AC – DC power
supply adaptor
9.0V
•
This is the 9V DC power supply which
comes with the ISPnano kit.
2
Using an external power
supply
9.0 – 24.0V DC
•
This is an external power supply.
•
A
‘DC Power Cable’
is required to
connect to the
‘DC IN’
connector.
4.4.2 Powering the programmer using the AC Wall Adaptor
The ISPnano programmer kit comes with an ‘AC Mains Adaptor’ which converts 110 – 240V AC
mains to a 9V DC regulated supply suitable for use with the programmer. This can be used to power
the programmer – see connection diagram below.
Instructions:
•
Plug the 2-pin JST connector on the end of the power supply cable into the 2-pin socket on the
ISPnano programmer labelled
“DC IN”
•
Select the correct mains connector for your country and fit this to the Mains Adaptor.
•
Plug the Mains Adaptor into a power socket and switch on the power.
•
The ISPnano programmer should power up and the ‘STATUS LED’ should illuminate.
85 / 135
85 / 135
