Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
5
1.4 ISPnano Programmer Module - Main Features
The main features of the
‘ISPnano Programming Module’
are detailed in this section. This module is
found in the ISPnano Programmer, ISPnano-ATE programmer and also the ISPnano-MUX2 / MUX4 /
MUX programming Systems.
Wide ranging Device Support capability
•
Supports In-System Programming (ISP) of many popular FLASH Microcontrollers, Serial
EEPROM and serial FLASH Memories
High-speed Programming
•
Optimised algorithms, on-board project data storage and high-speed line-driver circuitry delivers
the fastest possible programming times
Supports most ISP Protocols
•
SPI, JTAG, I2C (2-wire), SCI, BDM,
•
Series 3 programmers only – Atmel XMEGA 2-wire PDI, ATtiny TPI(LV), ATtiny TPI(HV)
High-speed JTAG port
•
Supports high-speed JTAG programming of Atmel AVR and AT91SAM7 microcontrollers
High-speed SPI port
•
Supports full range of SPI speeds from 10 Hz up to 4 MHz
Dedicated 2-wire I2C serial port with independent drive circuitry
•
Supports high-speed I2C programming of Serial EEPROM and F-RAM memories.
Fully ESD and Over-voltage protected I/O
•
All Target I/O pins feature both ESD and over-voltage protection
Supports programming at Target Voltages down to 1.8V
•
An optimised driver circuit delivers fast clean programming waveforms from 1.8 to 5.0V.
Excellent Host Control connectivity
ISPnano Series 1
•
2 x RS232 Serial Ports
•
1 x RS485 In/OUT port – supports up to 32 programmers on an RS485 network
•
4-wire TTL Remote Control Port
•
Remote Keypad / Display (ideal for standalone control in a Test Fixture)
ISPnano Series 2
•
1 x USB Port
•
1 x RS232 Serial Port
•
1 x RS485 In/OUT port – supports up to 32 programmers on an RS485 network
•
4-wire TTL Remote Control Port
22 / 135
22 / 135
