Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
46
3.4 USB Port
3.4.1 Overview of USB connection
It is possible to connect a single
‘ISPnano Series III’
programmer to a controlling PC using the high-
speed USB interface. The USB interface provides a high-speed method of uploading programming
projects to the programmer. It works by installing a
‘Virtual COM Port (VCP)’
on the host PC which
our EQTools / ISP-PRO / ConsoleEDS utilities then communicate through.
Please note:
•
The USB connector on the programmer is a
‘mini-USB’
connector.
•
It is
NOT
possible to power the programmer via the USB port.
3.4.2 USB Driver - Installation Instructions
1. Make sure the USB cable is
NOT
connected between the PC and programmer
2. Install the
‘USB Driver’
– see Application Note AN126 for further instructions.
The
‘USB Driver’
can be found as follows….
i. On the CD-ROM which came with the programmer
The driver should be in the following sub-folder on the CD:
\USBDrivers\PPM4-MK1_ISPnano_SeriesII
ii. On the Equinox website
The latest USB Driver can always be found on the Equinox Website. This version may be more up-to-
date than the one on the CD-ROM so it is usually a good idea to check the website version first.
To download the USB Driver, please browse to the following web page:
http://www.equinox-tech.com/products/downloads.asp?details=286
*** Make sure the USB Driver is installed before going to step (3) ***
USB Port
63 / 135
63 / 135
